Netgear Powerline 1000 Setup
Wondering how to perform Netgear Powerline 1000 Setup? Wonder no more! Google has put you on the right page. Here, you will get to know everything that is needed for the configuration process of your Netgear Powerline 1000 device. Keep reading!
In today’s modern world, nobody can even think about moving a single step forward without the internet. Living without the internet is as difficult as living without breathing. That is where Netgear comes into view. The company has offered a wide range of extenders and routers to its users to help them access the internet without hassle. But, 90 percent of users do want to put them into the clutter of messy wires. That is the reason, they opt for Netgear Powerline 1000 adapters.
The adapters are very easy to carry and their installation process is as simple as writing ABC.
There are two easy ways through which you can easily perform Netgear Powerline 1000 setup.
The first is using the manual method and the second is using the WPS feature. Scroll down a little to know the Netgear Powerline 1000 configuration methods one by one.
Netgear Powerline 1000 Setup | Manually
Step 1: First things first, power on your Netgear Powerline 1000 adapter. We do not recommend using a power strip or an extension.
Step 2: Plug your Netgear Powerline 1000 adapters in reach of your existing router and connect them using an Ethernet cable. If you don’t have two or more wall plugs, we suggest – building them before proceeding with Netgear Powerline 1000 setup process.
Step 3: Get 3 Ethernet cables. Use the first one to connect your adapters and the rest two to connect your adapters with your existing router.
Are you planning to connect your devices wirelessly instead of using an Ethernet source? Well, you can do that – but then also you will need wall plugs to keep your devices in reach of each other. Just ensure to connect to the correct network.
Step 4: Are you done? Now, you can see that the Pick A Plug LED on your Netgear Powerline 1000 has started blinking, right? Wait till it gets stable!
Fab! You are all done! In the blink of an eye and the Netgear Powerline 1000 setup process can get completed.
Netgear Powerline 1000 Setup | WPS Method
Step 1: Provide your Netgear Powerline 1000 with a continuous power supply. Keep within reach of your router and the device on which you want to access the internet.
Step 2: Press the WPS button on your first adapter and after a few minutes, on the second one.
Step 3: Wait for some time. Press the WPS button on your existing router and on the device (s) on which you want to access the internet.
Fab! The Netgear Powerline 1000 setup process is completed using the WPS method.
Now, we suggest you log in to your device using the www.mywifiext.net web address and make changes to your Netgear Powerline 1000 device accordingly.
Troubleshooting Netgear Powerline 1000 Setup Issues
- Do not use damaged wall sockets for plugging in your devices.
- Avoid working on the devices and initiating the Netgear Powerline 1000 setup process if you found ups and downs in the power.
- The Ethernet cable used by you must be free of any sort of damage, dust, and cuts.
- If you have used a wireless source, then ensure to get access to your network only. The use of mobile data is not recommended. The reason is, you can face slow internet issues using mobile data.
- Have access to a faster and more stable internet connection. Contact your ISP regarding the same.
- By any chance, if you find that your Netgear Powerline 1000 adapters got overheated, turn them off and wait till they become cooler as they have arrived in your home.
The Last Words
We hope that you have enjoyed this page and found the steps to perform Netgear Powerline 1000 setup easy. Please share your answer with us. And, just in case, you get stuck with Netgear Powerline 1000 configuration process, feel free to contact us anytime.