Netgear Extender Not Showing Up? Let’s Fix It!

Reasons: Netgear Extender Not Showing Up

If your Netgear extender not showing up, it is mostly likely not recognized. This can happen when the Netgear extender is not working or inactive.

Here we have highlighted some common causes with a brief description. So, take a look at them:

Electricity Supply Issue

If your Netgear extender is not connected to a constant and reliable electricity source, then there is a possibility that the extender is stuck on the reboot loop, thus the Netgear extender not showing up.

Usage of Incorrect IP

Users can face this when they select the wrong IP address in the extender network settings. So, there is a possibility that you put the incorrect IP address.

Corrupted & Outdated Firmware

When people perform the new extender setup in their home, they forget to update the firmware and use the old firmware which puts the device at higher risk.

Receiver Device Issue

Sometime older WiFi might appear in the network list because they are remembered. If there is an issue in the receiver device, new WiFi might not be discovered.

SSID Not Enabled

You can also face this issue in case you have not enabled the SSID of the extender from the settings of the extender.

Now, you know the reasons that cause this issue on your device. So, having this possibility in mind, let’s move to the troubleshooting section.

Fix: Netgear Extender Not Showing Up

Start with the reboot process because it can be seen that 9 out of 10 users can fix the Netgear extender not showing up issue. So, there is a possibility that you are in luck and will be able to rectify the issue.

Moreover, you can also remove the technical glitches from the device by restarting the device. To reboot the extender, you need to follow the outlined steps:

• Unplug the extender.
• Give some minutes until the device is recovered.
• Thereafter, plug the extender back into the power socket.
• Press the turn-on button.

Troubleshoot Poor Internet Connection

The general reason why the Netgear extender not showing up in the network list is weak and non-existent internet connections.

So, to tackle this issue, you need to take a small check on the internet speed and connection. First, we recommend you check the Ethernet cable connection if you use it. Because sometimes, mistakenly users damage the Ethernet cable and use it for the connectivity between the router and extender. If you find any fault or damaged area while checking the cable, change it ASAP.

Thereafter, check the speed of the internet because some time internet service providers do the maintenance on the network area and forget to inform the customer. Or maybe your internet package is over. So in this situation, contacting ISP is a good option.

Remove the WiFi Interference

Now, you need to remove the intact interference that is disturbing your extender network. You need to place your extender far away from home appliance and metal object because electronic gadgets have electromagnetic waves occur the WiFi interference.

Once, you are done with the aforementioned troubleshooting tips, try to reconnect your WiFi extender to the power and find the extender network in the list.

Bottom Lines

Now you know very well why you face the Netgear extender not showing up the issue and how you can fix it by using the mentioned troubleshooting tips.

In case the problem is still there and you were not able to fix it, then can contact us for additional assistance.