Netgear WiFi Extender Connected But No Internet Issue [Fixed]

Perhaps, all that your device needs in order to get back on track is a little restart. In order to give your device a chance to start new, you need to turn it OFF and after some time, turn it ON. Now, check if the extender is connected but no internet issue has left you for good. If it has not, do not stop reading.

1. Check the Ethernet Connection

Maybe the Ethernet cable connection between the wireless range extender and the host router is loose. Think about it, if the cable keeps getting unplugged from the devices, then there is no way in which you will be able to connect to the internet.

In view of this, tightly connect the cable to the ports of the devices. Apart from this, make sure that the cable is not worn out from any point.

Although connecting the devices with a damage-free cable will help you to resolve the Netgear WiFi range extender connected but no internet issue, on the off chance, it does not; you should join them with the aid of a wireless medium.

2. Place the Devices in Proximity

Another reason that might have caused the Netgear WiFi extender connected but no internet issue is too much space between the networking devices. Perhaps, the extender is kept in one room and the router is kept in another due to which it is becoming difficult for them to transmit signals properly.

To change this, you need to reduce the unwanted space between them. This can be done if you unplug your extender from its wall socket and plug it into the one located in the same room where the router is kept.

However, at the same time, ensure that there is not too less distance between the range extender and host router as it can force their signals to clash. If this happens, then even if there was a one percent chance of you accessing the internet, that will go too.

3. Reset the Netgear WiFi Extender

Oops! Considering you are reading this hack, then it seems that the Netgear WiFi extender connected but no internet issue is troubling you much more than we anticipated. Thus, you should restore your networking device to its default factory mode.

This can be done if you press the Reset button on the extender and hold on for some time. To be precise, wait for a minimum of 30 seconds and a maximum of 5 minutes.

The Reset button cannot be pressed with bare hands considering it is shaped in the form of a hole. You need the help of an oil pin or a paper clip to reset the Netgear range extender.

Right after you have reset your device, set it up from scratch. Now, you might be thinking about how to setup a WiFi extender, right? Well, it is recommended that you refer to the instructions given in the manual of your device.

Starting from top to bottom, you will find the steps to execute every process related to your device there. Also, if you want to become aware of the specifications of your extender at a deeper level, the same can be done by reading the information given in the manual.

Verdict

Troubleshooting the Netgear WiFi extender connected but no internet issue is not rocket science. However, for some reason, many users are unable to resolve this issue with ease. Considering you are one of them, we hope that after reading the information given above, you will be able to gain access to the Internet. In case you do, feel free to log in to your wireless range extender and manage it remotely.